中文 / EN
CURRENT网站首页 > HOME > PRODUCTS > AtoN AIS

NAN-2000 AIS AtoN

Published on: 2020-09-11

【PRODUCT INTRODUCTION】

AIS AtoN station is used for light monitoring from AtoN administration. AIS AtoN station’s transmission can be received by shipborne AIS to learn the position & status of the AtoN.

As Type I defined by IALA, NAN-X000 is specially designed to be used for buoys, which carries limited batteries to supply any additional electronic equipment. 

NAN-X000 can be used for below applications:

- AtoN in River or at Sea

- Offshore and oil platform

- Oceanic buoys

- Electronic fence in water

- Offshore wind farm

- Electronic passage by bridge


NAN-X000 is designed to transmit messages both for real and virtual AIS AtoN. For example, NAN-X000 can be used by harbor authority to establish virtual AIS AtoN channel. When shipborne AIS receives those transmissions, a series of AtoN symbols will be displayed on electronic chart. 

NAN-X000 conforms to the international standards such as IALA A-126, IEC 62320-2, ITU-R M.1371-5 and IEC60945.


image.png


【SPECIFICATION】

TX Frequencies:

AIS1 (161.975MHz)

AIS 2 (162.025MHz)

Communication Mode:

FATDMA, RATDMA

Message Type:

MSG 6, MSG 21 (default)

Transmission Interval:

3~60 minutes (to be configurated)

Transmitting Power:

12.5W (NAN-1000/2000/5000) 

4.0W (NAN-4000)

Power Consumption:

Max.40mA (12V)

Interface:

RS232 port NMEA0183

Working Temperature:

-15~+55℃

Power Supply:

Nominal 12VDC (12~18VDC)

IP grade:

IP 66


【INSTALLATION DIAGRAM】

image.png


NSR AIS AtoN SERIES BROCHURE.pdf


Copyright (©) 2020 NEW SUNRISE CO., LTD.  ICP 2020050227  Technical Support: suzhou yuanma   Su Gong An Bei No.32050702010919